• Overview
  • Frame & Panel
  • Color Options
  • Hardware
  • Glazing
  • Simulite
  • Installation
  • Sizes

Lift and Slide Stacking Doors

  • Doors available in single and bi-parting operation configurations
  • SFI Certified and labeled standard Douglas Fir or Ponderosa Pine
  • FSC certified Douglas Fir or Ponderosa Pine available upon request
  • Knotty Alder and other species available upon request
  • 4 5/8" or 5 5/8" stile widths
  • 4 5/8" or 6 13/16" head rail heights
  • 6 13/16", 10" or 12" bottom rail heights
  • Up to 5 panels in single direction configuration
  • Up to 10 panels in bi-parting configuration
  • Available in all of our current clad color offerings
  • Unlimited custom clad colors
  • Multitude of glass options available
  • 3 widths of simulite bar, 7/8" 1 5/16" & 2"
  • Ability to mix bar widths
  • 3 simulite profiles, Colonial or Contemporary, 5/8" Putty
  Photo: Mark Tanner Construction and Sandbox Studio ©VanceFox.com

 

The Sierra Pacific Lift and Slide Stacking Door will be a stunning addition to your living space. It is offered in sizes up to a maximum of 23 feet wide and ten feet tall.

Frame and panel components are manufactured from kiln-dried preservative treated Douglas Fir. Ponderosa Pine or Knotty Alder are available options. Interior surfaces are unfinished clear wood, ready to prep for stain or paint. An optional factory applied interior primer coat is available.

Panel stiles and rails are 2 ¼" thick kiln-dried, preservative treated Douglas Fir. Ponderosa Pine and Knotty Alter are available options. Top and bottom rails are solid material and engineered for strength and stability. The panel stiles are laminated and engineered. Standard stiles and top rails are 4 5/8" wide. Standard bottom rails are 6 13/16" wide.


Lift and Slide Panel

The maximum panel height is 120", maximum panel width is 72" and maximum panel weight is 660 pounds.

All exposed exterior surfaces of our frame head and jambs are covered with .062" extruded aluminum.

Extruded aluminum frame corners are sealed with acrylic sealant. A continuous extruded aluminum nailing flange is an integral part of the frame extrusion.

Panel exteriors are covered with .075" extruded aluminum.

The door sill is a low profile drain track made of thermally broken extruded aluminum in a dark bronze anodized finish. The standard sill height is 1". Intruding water can drain through the exterior weep gates or via installed drain tubes.

The system is shipped KD (knocked down), with components prepped and pre-drilled for field assembly.

The extruded aluminum clad exterior on Sierra Pacific windows and doors features a finish composed of durable 100% flouropolymer powder coating thermoset to meet AAMA 2605 standards. Powder coatings are more friendly to the environment than liquid coatings for many reasons, including:

  • Powder coatings emit near-zero volatile organic compounds (VOCs). Liquid coatings are a major source of man-made VOCs.
  • The application of liquid coatings requires additional energy usage to operate the thermal oxidizers and scrubbers necessary to lower the VOC emissions generated during the wet paint process.
  • Powder is solvent free. Application of powder does not require the use of solvents necessary in liquid coating applications.
  • Powder coating is an EPA recommended finishing system, contributing to the Green Building Initiative.
  • Powder coated finishes have more surface hardness and scratch resistance than common liquid coatings.


Click on image to enlarge

Color Stay™ Collection

White 001
White 001
Linen* 032
Linen* 032
French Linen 112
French Linen 112
Morning Dove Gray 113
Morning Dove Gray 113
Colonial White 313
Colonial White 313
Sandstone 003
Sandstone 003
Beige 335
Beige 335
Tan 043
Tan 043
Gull Gray* 007
Gull Gray* 007
Seawolf* 044
Seawolf* 044
Fashion Gray 111
Fashion Gray 111
Slate Gray 045
Slate Gray 045
Battleship Gray* 321
Battleship Gray* 321
TW Black 061
TW Black 061
Black Sable* 060
Black Sable* 060
Slate Blue 008
Slate Blue 008
Light Blue 046
Light Blue 046
Steel Blue* 114
Steel Blue* 114
Aqua Mist 115
Aqua Mist 115
Hampton Blue 323
Hampton Blue 323
Sage Green 005
Sage Green 005
Teal 047
Teal 047
Hemlock Green 048
Hemlock Green 048
Patina Green 051
Patina Green 051
Forest Green 049
Forest Green 049
Evergreen 009
Evergreen 009
Green 004
Green 004
Hartford Green* 050
Hartford Green* 050
Moss 031
Moss 031
Greek Olive* 081
Greek Olive* 081
Terra Cotta 053
Terra Cotta 053
Clay* 026
Clay* 026
ICI Brown 056
ICI Brown 056
Colonial Red* 054
Colonial Red* 054
Harvest Cranberry 010
Harvest Cranberry 010
Burgundy 055
Burgundy 055
Deep Plum 116
Deep Plum 116
Deep Taupe 077
Deep Taupe 077
Antique Bronze* 057
Antique Bronze* 057
TW Brown 058
TW Brown 058
Bahama Brown* 309
Bahama Brown* 309
Regal Brown 059
Regal Brown 059
Brown 002
Brown 002
Bronze* 024
Bronze* 024
Black* 023
Black* 023

* Colors Available in Sierra Pacific Vinyl Offering (14)

Textured Collection

Peppered Steel 110
Peppered Steel 110
Sift Espresso 097
Sift Espresso 097
Mocha 093
Mocha 098
Cajun Spice 099
Cajun Spice 099
Pesto 100
Pesto 100

Weathered Collection

Weathered Café Royale 104
Weathered Café Royale 104
Weathered Cocoa 105
Weathered Cocoa 105
Weathered Brown 034
Weathered Brown 034
Weathered Bronze 078
Weathered Bronze 078
Weathered Clay 075
Weathered Clay 075
Weathered Red Pepper 106
Weathered Red Pepper 106
Weathered Rust 076
Weathered Rust 076
Weathered Basil 107
Weathered Basil 107

Pearl Metallic Collection

El Cajon Silver 068
El Cajon Silver 068
Platinum 067
Platinum 067
Light Bronze Pearl 069
Light Bronze Pearl 069
Medium Bronze Pearl 070
Medium Bronze Pearl 070
Dark Bronze Pearl 071
Dark Bronze Pearl 071

Metallic Collection

Alpine Silver 062
Alpine Silver 062
Metallic Champagne 063
Metallic Champagne 063
Bronze Classic 064
Bronze Classic 064
Classic Copper 088
Classic Copper 088
Copper Penny 065
Copper Penny 065

Industrial Collection

Medium Bronze Industrial 101
Medium Bronze Industrial 101
Dark Bronze Industrial 102
Dark Bronze Industrial 102

CA Anodized Collection

Clear Anodized 103
Clear Anodized 103
Medium Bronze Anodized 096
Medium Bronze Anodized 096
Dark Bronze Anodized 095
Dark Bronze Anodized 095
Black Anodized 117
Black Anodized 117

WI Anodized Collection

Clear Anodized 332
Clear Anodized 332
Medium Bronze Anodized 307
Medium Bronze Anodized 307
Dark Bronze Anodized 306
Dark Bronze Anodized 306
Black Anodized 353
Black Anodized 353
Copper Anodized 352
Copper Anodized 352
Note – Anodized suppliers are regionally based to our plants, so don’t mix and match.
 
Colors on screen may vary from physical colors. See your local representative for actual cladding samples.

 

The standard hardware features a solid brass material coated in four finishes. Very low profile plates are installed on the active panels, using one removable handle to raise or lower all active panels. A non-keyed flush pull is located on the exterior stile of the leading active panel. Functional Fenestration Series 100. Positive-feel action at 6:00 and 12:00 positions. Plates and pulls have uniform CNC milling profiles, stainless steel 10 mm square spindles.

A multipoint lock set is on the edge of the leading active panel, which engages with lock bolts attached to the side jamb.

 

 

Removable Handle/Flush Pull
Satin Nickel Satin Nickel
Satin Nickel
Satin Nickel Satin Nickel
Dark Painted Bronze
Satin Nickel Satin Nickel
Oil Rubbed Bronze
Satin Nickel Satin Nickel
Polished Brass
Satin Nickel Dark Painted Bronze Oil Rubbed Bronze Polished Brass

Choosing the Correct Glazing System

Today’s architecture features ever increasing expanses of glass to capture views and allow natural light to illuminate interiors. Choosing the correct glazing system (the glass and the spacer between the panes of glass) for your climate, exposure and architectural design is one of the most important decisions you will make during the construction process. Sierra Pacific’s advanced glazing system features a 100% polymer structural foam spacer by Quanex, (the world’s only NO-Metal Warm Edge insulating glass spacer) paired with high-performance, spectrally-selective low-E glass.

Warm Edge

In order to overcome the thermal inefficiency of conventional aluminum window spacers, a new type of spacer product called warm edge technology has evolved in the window industry. Warm Edge refers to the type of spacer material used to separate the panes of glass in an insulated window unit. If the material conducts less heat or cold at the edge of the glass than a conventional aluminum spacer, it is said to be "warm-edge." Most of these newer window spacers are less conductive and outperform pure aluminum. But there’s still one small problem -- they all contain some kind of metal. And metal is highly conductive. Unlike other so-called "warm" edge spacers that contain steel or aluminum wrapped in butyl rubber, the Quanex spacer is made of 100% polymer structural foam. The NO-Metal formula conducts less heat and cold than conventional metal spacers and provides the warmest possible edge.

The NO-Metal Warm Edge:

Quanex TrueWARM Spacer
  • Assures comfortable humidity levels and reduces worries about condensation and mold
  • Resists window condensation
  • Reduces energy costs
  • Provides long-life durability
  • Reduces outside noise transmittance
  • Structural thermoset foam spacer reduces the stress on the system therefore reducing stress on the glass which results in less stress cracks and reduces stress on the sealant increasing sealant effectiveness
  • Globally tested and proven spacer system

Ideal Glass Performance

The insulating effect of your windows has a direct impact on the comfort factor inside your home or commercial building. Typically 75% of the exposed surface of a window is glass, and the temperature of the interior surface of the glass directly affects the air temperature in the room. The better insulated the glass, the more comfortable the room. Sierra Pacific offers many glass options, including energy efficient, spectrally-selective low-E insulated glass, tinted, obscure and specialty glazings.

See our Technical Section for NFRC Thermal Performance Data

High Performance Double Coat Low-E Insulated Glass

Reduce Heating and Cooling Loads
High performance insulated glass with two low-E coatings blocks more solar heat than ordinary low-E and clear glass. The oppressive heat of the sun is composed of visible light and invisible infrared energy. Insulated glass produced with two low-E coatings allows the daylight to pass through the glass and filters out solar heat. In fact, it blocks a large percentage of the sun's harmful ultraviolet rays and delivers a performance improvement in winter nighttime insulation (R-value) compared to non-coated air-filled insulating glass.

High Performance Triple Coat Low-E

Insulated Glass
Insulated glass with three low-E coatings delivers the ideal balance of solar control and high visibility. This glass provides year-round comfort and energy savings, making it a good option no matter where you live. The secret is a triple layer of silver in the coating stack. It is formulated to reject solar heat while maintaining attractive visibility. It keeps the heat out while letting light in.

 

Sierra Pacific also offers a wide variety of glazing options to meet your requirements including: Additional Glazing Options

Our interior simulite bars are made from clear Ponderosa Pine or Douglas Fir and are available in either Colonial or Contemporary profiles in three widths: 7/8", 1 5/16" or 2". In addition, we offer a 5/8" Putty Profile in clad exterior only and a 7/8" Atherton profile in wood exterior only. Insulated units with simulite are standard with an internal shadow bar to give the appearance of authentic divided lites.

 

Colonial Profile - Clad Exterior
Colonial Profile
Contemporary Profile - Clad Exterior
Contemporary Profile
Putty Profile - Clad Exterior
Putty Profile

 

Lift and Slide Stacking Door Installation Instructions

 

Coming soon!

 

Bi-Fold Door